Sensorcon Inspector 2 CO Monitor Kit with Pump & Probe
The Inspector is calibrated before shipping, showing readings at 1 ppm resolution and ±10% accuracy (e.g., 100 ppm means 90–110 ppm). Under 20 ppm, accuracy improves to ±2 ppm. Readings below 5 ppm are usually safe but worth monitoring. How accurate is the Inspector, and what do the ppm readings mean? What is MAX Mode, and when should I use it? MAX Mode records the highest gas level detected over time. This helps you track peak CO exposure from sources such as car exhaust or chimneys. Press the MAX button to activate; an arrow appears above 'MAX' when it's on. Do I need a pump, and can I mount the Inspector on a wall? You don't need a pump but it helps sample air in tight spots. Sensorcon offers kits with the Inspector, case, and pump. Since the alarm is quieter than typical CO detectors, clip it to your clothing or carry it instead of mounting on a wall. How does the Inspector differ from regular CO detectors, and can other gases affect readings? Unlike traditional CO detectors that alarm after high CO, the Inspector shows real-time ppm above 35. It's compact, durable, & affordable. Hydrogen can cause false readings (~10-15% of its level), but methane & small alcohol amounts don't affect it. How long does the battery last, and what maintenance is required? The Inspector uses a CR123A battery lasting 2–4 yrs, though frequent alarms drain it faster. Most users need little maintenance, but professionals may calibrate it occasionally. Sensorcon offers service plans to assist with upkeep & reduce downtime.